This week I was experimenting with the distcc and Ninja on a Pandaboard cluster and it behaves exactly as I expected, which is a good thing, but it might not be what I was looking for, which is not. 😉
Long story short, our LLVM buildbots were running very slow, from 3 to 4.5 hours to compile and test LLVM. If you consider that at peak time (PST hours) there are up to 10 commits in a single hour, the buildbot will end up testing 20-odd patches at the same time. If it breaks in unexpected ways, of if there is more than one patch on a given area, it might be hard to spot the guilty.
We ended up just avoiding the make clean step, which put us around 15 minutes build+tests, with the odd chance of getting 1 or 2 hours tops, which is a great deal. But one of the alternatives I was investigating is to do a distributed build. More so because of the availability of cluster nodes with dozens of ARM cores inside, we could make use of such a cluster to speed up our native testing, even benchmarking on a distributed way. If we do it often enough, the sample might be big enough to account for the differences.
So, I got three Pandaboards ES (dual Cortex-A9, 1GB RAM each) and put the stock Ubuntu 12.04 on them and installed the bare minimum (vim, build-essential, python-dev, etc), upgraded to the latest packages and they were all set. Then, I needed to find the right tools to get a distributed build going.
It took a bit of searching, but I ended up with the following tool-set:
- distcc: The distributed build dispatcher, which knows about the other machines in the cluster and how to send them jobs and get the results back
- CMake: A Makefile generator which LLVM can use, and it’s much better than autoconf, but can also generate Ninja files!
- Ninja: The new intelligent builder which not only is faster to resolve dependencies, but also has a very easy way to change the rules to use distcc, and also has a magical new feature called pools, which allow me to scale job types independently (compilers, linkers, etc).
All three tools had to be compiled from source. Distcc’s binary distribution for ARM is too old, CMake’s version on that Ubuntu couldn’t generate Ninja files and Ninja doesn’t have binary distributions, full stop. However, it was very simple to get them interoperating nicely (follow the instructions).
You don’t have to use CMake, there are other tools that generate Ninja files, but since LLVM uses CMake, I didn’t have to do anything. What you don’t want is to generate the Ninja files yourself, it’s just not worth it. Different than Make, Ninja doesn’t try to search for patterns and possibilities (this is why it’s fast), so you have to be very specific on the Ninja file on what you want to accomplish. This is very easy for a program to do (like CMake), but very hard and error prone for a human (like me).
To use distcc is simple:
- Replace the
distcc compileron your Ninja rules;
- Set the environment variable
DISTCC_HOSTSto the list of IPs that will be the slaves (including localhost);
- Start the distcc daemon on all slaves (not on the master):
distccd --daemon --allow <MasterIP>;
- Run ninja with the number of CPUs of all machines + 1 for each machine. Ex:
ninja -j6for 2 Pandaboards.
A local build, on a single Pandaboard of just LLVM (no Clang, no check-all) takes about 63 minutes. With distcc and 2 Pandas it took 62 minutes!
That’s better, but not as much as one would hope for, and the reason is a bit obvious, but no less damaging: The Linker! It took 20 minutes to compile all of the code, and 40 minutes to link them into executable. That happened because while we had 3 compilation jobs on each machine, we had 6 linking jobs on a single Panda!
See, distcc can spread the compilation jobs as long as it copies the objects back to the master, but because a linker needs all objects in memory to do the linking, it can’t do that over the network. What distcc could do, with Ninja’s help, is to know which objects will be linked together, and keep copies of them on different machines, so that you can link on separate machines, but that is not a trivial task, and relies on an interoperation level between the tools that they’re not designed to accept.
And that’s where Ninja proved to be worth its name: Ninja pools! In Ninja, pools are named resources that bundle together with a specific level of scalability. You can say that compilers scale free, but linkers can’t run more than a handful. You simply need to create a pool called linker_pool (or anything you want), give it a depth of, say, 2, and annotate all linking jobs with that pool. See the manual for more details.
With the pools enabled, a distcc build on 2 Pandaboards took exactly 40 minutes. That’s 33% of gain with double the resources, not bad. But, how does that scale if we add more Pandas?
How does it scale?
To get a third point (and be able to apply a curve fit), I’ve added another Panda and ran again, with 9 jobs and linker pool at 2, and it finished in 30 minutes. That’s less than half the time with three times more resources. As expected, it’s flattening out, but how much more can we add to be profitable?
I don’t have an infinite number of Pandas (nor I want to spend all my time on it), so I just cheated and got a curve fitting program (xcrvfit, in case you’re wondering) and cooked up an exponential that was close enough to the points and use the software ability to do a best fit. It came out with
86.806*exp(-0.58505*x) + 14.229, which according to Lybniz, flattens out after 4 boards (about 20 minutes).
Distcc has a special mode called pump mode, in which it pushes with the C file, all headers necessary to compile it solely on the node. Normally, distcc will pre-compile on the master node and send the pre-compiled result to the slaves, which convert to object code. According to the manual, this could improve the performance 10-fold! Well, my results were a little less impressive, actually, my 3-Panda cluster finished in just about 34 minutes, 4 minutes more than without push mode, which is puzzling.
I could clearly see that the files were being compiled in the slaves (distccmon-text would tell me that, while there was a lot of “preprocessing” jobs on the master before), but Ninja doesn’t print times on each output line for me to guess what could have slowed it down. I don’t think there was any effect on the linker process, which was still enabled in this mode.
Simply put, both distcc and Ninja pools have shown to be worthy tools. On slow hardware, such as the Pandas, distributed builds can be an option, as long as you have a good balance between compilation and linking. Ninja could be improved to help distcc to link on remote nodes as well, but that’s a wish I would not press on the team.
However, scaling only to 4 boards will reduce a lot of the value for me, since I was expecting to use 16/32 cores. The main problem is again the linker jobs working solely on the master node, and LLVM having lots and lots of libraries and binaries. Ninja’s pools can also work well when compiling LLVM+Clang on debug mode, since the objects are many times bigger, and even on above average machine you can start swapping or even freeze your machine if using other GUI programs (browsers, editors, etc).
In a nutshell, the technology is great and works as advertised, but with LLVM it might not be yet the thing. It’s still more profitable to get faster hardware, like the Chromebooks, that are 3x faster than the Pandas and cost only marginally more.
Would also be good to know why the pump mode has regressed in performance, but I have no more time to spend on this, so I leave as a exercise to the reader. 😉